DJ Mix: The 5 variable controls here allow you to
get a customized mix of the 5-Band AGC sections’
output to feed the special DJ processing section.
Each band defaults to a “middle” setting of 0.0dB
so your changes will be offsets in + or – dB.
You can use these controls like a 5-Band equalizer
to tailor the sound applied to the DJ 3-Band
processing section.
These controls will not affect the main processing
path.
DJ Mix(er) (Basic Tab)
DJ Lim:, an Output Master level control and
Density management controls for each of the 3
bands.
The Density controls set the aggressiveness of the
DJ processor, higher settings giving a more
processed and compressed sound and lower
settings giving a more open sound. There are
Density controls for each of the 3 bands and an
overall master setting that adjusts all 3 bands at
once.
DJ Lim(iter) (Basic Tab)
Gain-reduction metering for the 3-Band DJ limiter
is now available in the meter panel.
DJ Limiter Meterng
To Next Page
Loading...
