Feature Activation
To activate additional features on your Omnia.11 such as upgrading to the HDFM version from the FM Only
version, you will need to download the activation data file by clicking the Activation Data button (NOTE: You may
need to right-click the button and choose “Save Link As…” or equivalent in some browsers.) Save this file and send
it to Omnia tech support when requested.
A feature activation file will be sent to you. Upload this file to the unit by locating the file with the Browse button
and then click the upload feature button.
Factory Diagnostics
Click the “Factory Diagnostics” button to bring up a diagnostic log, a table of CPU temperatures, log file buttons
and a button to restart the Omnia.11 meters.
The top half of the screen shows the Process Status log and a table of CPU temperatures:
To Next Page
Loading...
