Click the “Save” button; choose the desired folder to save the preset in from the “Save As” dialog (this may vary
with the OS) and click “Save” to save the file or “Cancel” to abort.
Presets are saved as small, text-based files with the “.opr” extension.
To upload a previously saved user preset to the Omnia.11, use the file entry box (or the browse button) to enter the
path to the preset file name to be uploaded and press the “Upload” button.
The preset will be saved to the Omnia.11 with the same name as the selected file, minus the .opr extension.
Note that uploaded presets will be placed in the Omnia.11’s preset list but will not go directly on the air.
Preset Import
This will bring up a screen with 2 special import preset boxes used to import presets y9ou may have that were
created on older software versions 1.03 or 1.1. Instructions are provided on the Import Presets screen.
Preset Authorization
This will bring up the Preset Authorization Group Management screen where authorization groups can be added or
deleted. For full information please see Page 20.
I/O Configuration File Transfer
Similarly, I/O configurations can be saved to or loaded from your computer.
Shown below is the bottom half of the “File Transfer” screen, which is used for saving and loading I/O
configuration files to and from your computer.
I/O Configuration download and upload operations work similarly to the Preset download and upload operations
described above with the exception that the filename extension for I/O configurations is “.oic”.
To Next Page
Loading...
Need help?
General
