External Sync Range: Accepts sample rates from 32kHz to 96 kHz.
Used for synchronization of the Digital Output signal to an external
reference. Automatically accepts sample rates between 32 and 96 kHz.
Connector: XLR-female, EMI-suppressed. Pin 1 chassis ground, Pin 2-3
transformer isolated, balanced, and floating. Standard AES3 specified
balanced 110 ohm input impedance.
External Sync Range: Automatically accepts sample rates between 32kHz and 96kHz
Connector: XLR-female, EMI-suppressed. Pin 1 chassis ground, pins 2 and 3 transformer isolated,
balanced, and floating – AES3 standard 110 ohm impedance.
Remote Control: Via Ethernet. TCP/IP control via built-in Java (TM) based remote control program
integrated into web page interface. All software is served from the built-in web server to
any standard web browser; there is nothing to install on the user's computer.
Ports Used: The normal http port 80 and TCP ports 93, 4545 & 4546.
Connectors: Ethernet - Industry standard EMI-suppressed RJ-45 connector.
GPI Interface: (Support not yet available)
Connector: EMI suppressed DB-15 female connector.
Power Requirements: Voltage: 100-250 VAC, 47-63 Hz, Less than VA.
Power Connector: EMI suppressed IEC male.
Detachable 3-wire power cords supplied for US and European use.
Power Supply: Internal. Overvoltage and short circuit protected. Meets EN55022, EN55011 Level B
Conducted Emissions. EN61000-4-2, -3, -4, -5, -6 level 3 immunity compliant. Full
international safety approval. CE marked.
Environmental: Operating Temperature: 32 to 122 deg. F / 0 to 50 deg. C for all operating
voltage ranges. Humidity: 0-95% RH, non-condensing.
Dimensions: 19" wide x 7” high x 20” deep (48 cm wide x 18 cm high x 51 cm deep) including
connectors. Unit requires four EIA rack spaces for mounting.
Shipping Weight: 36 lbs. / 16.3 kg
Telos/Omnia Research and Development is constantly working to improve the quality of our products.
Actual specifications are subject to change or improvement without notice.
To Next Page
Loading...
Need help?
General
