Omnitronix DL100 User’s Manual
Page 22
Data-Link DL100 - FTP Push Setup Menu
A) FTP Push Enable [OFF]
B) FTP Server Address [0.0.0.0]
C) Username [Default FTP Username]
D) Password []
E) Account []
F) Directory []
G) Minutes Between Push Attempts [1440]
H) Select Files to Push
I) Remote File Names
FTP Push Setup: FTP Push Enable is an on/off toggle for FTP push.
FTP Push Setup: FTP Server Address is the IP address of the FTP server to push to.
FTP Push Setup: Username/Password are the username and password settings for accessing the
remote FTP server.
FTP Push Setup: Account is a third login option used only on some FTP servers. Consult the
network administrator to see if this is necessary.
FTP Push Setup: Directory is the path used to upload the file(s). Leaving this option blank
uploads the files into the root login directory.
FTP Push Setup: Minutes Between Push Attempts has a valid range of 1 to 9999 minutes.
FTP Push Setup: Select Files to Push brings up the menu in the following example. Each item
in the menu is a toggle for the specified file.
Data-Link DL100 - FTP File Selection
A) Data File 1 [ON]
B) Data File 2 [ON]
C) Data File 3 [ON]
D) Data File 4 [ON]
E) Alarm File [ON]
FTP Push Setup: Remote File Names brings up the menu in the following example. Each item
in the menu allows the admin to set the new remote file name for uploaded files.
Data-Link DL100 - FTP File Names
A) Data File 1 [FILE1]
B) Data File 2 [FILE2]
C) Data File 3 [FILE3]
D) Data File 4 [FILE4]
E) Alarm File [ALARM]
FTP Autodelete automatically deletes records that are retrieved via the internal FTP server. This
function has no effect on FTP push operations, which always have autodelete enabled.
To Next Page
Loading...