Omron 61F-GP-N8 User Manual

E-6 Conductive Level Controller 61F-GP-N8
■ Accessories (Order Separately)
Selection Guide for Electrode Holders and Separators
Electrode Holders
Electrode Separators
Selection Guide for Electrodes, Connecting, and Lock Nuts
Applications For city water and other
general-use electrodes.
Easy-to-replace sepa-
rate versions facilitate
maintenance of elec-
trodes.
When mounting space is
limited. Special 3-pole
holder of small size and
light weight. Ideal for soft
drink vendors, etc., where
only limited space is avail-
able.
For low specific liquids. Used for sewage,
sea water, etc., having a low specific resis-
tance. In sewage use, electrode holders
must be installed 10 to 20 cm apart from
one another. For acids, alkalis and sea wa-
ter, electrode holders may be as much as
1 meter apart to operate properly.
When resistance to high
pressure is required. Ide-
al for use in tanks where
temperature or pressure
inside the tank is high,
e.g. 250°C
Mounting style Flange Screw Flange Screw
Insulator material Phenol resin Phenol resin Ceramics Teflon
Max. temperature 70°C150°C (without water drips or vapor on the
surface of the electrode holder)
250°C (without water
drips or vapor on the sur-
face of the electrode
holder)
No. of
electrodes
1 --- --- BF-1 BS-1
3 PS-3S PS-31 --- ---
No. of electrodes Model
1 F03-14 1P
3 F03-14 3P
Applicable liquids Material Models for individual electrode assembly components
Electrode (1m long) Connecting nut Lock nut
Model Indication
mark
Model Inscription Model Inscription
Purified city water,
industrial water,
sewage
Equivalent
to SUS 304
(AISI-304)
F03-01 SUS201 1 line F03-02 SUS201 --- F03-03 SUS201 ---
Purified city water,
industrial water,
sewage, dilute
alkaline solution
SUS316
(AISI-316)
F03-01 SUS316 2 lines F03-02 SUS316 6 F03-03 SUS316 316

Omron 61F-GP-N8 Specifications

General

Brand	Omron
Model	61F-GP-N8
Category	Controller
Language	English