28
3. Press the button repeatedly to scroll through the previous
readings stored in the memory.
5.2 Viewing the Average Reading
Your monitor can calculate an average reading based on the latest 2 or 3 readings
taken within 10 minutes span.
1. Select your user ID.
2. When your monitor is off, press and hold the button for more than
2 seconds.
• If there are only 2 readings in the memory for that
period, the average will be based on these 2
readings.
• If the average reading is high (refer to section 1.3),
the “ ” symbol appears.
5.3 Viewing Morning Weekly Averages
Your monitor calculates and displays weekly averages for the measurements taken
in the morning for 4 weeks per user.
1. Select your user ID.
2. Press the button once.
The morning weekly average for the current week “THIS
WEEK” appears on the display.
If the morning weekly average is high (refer to
section 1.3), the “ ” symbol appears.
To Next Page
Loading...
Need help?
General
