27
5. Using Memory Function
Your monitor automatically stores up to 100 readings per user.
• This monitor can be used by multiple users. Refer to section 2.6 to switch user.
Make sure which user ID stores your own readings.
5.1 Viewing the Readings Stored in Memory
1. Select your user ID.
2. Press the button.
The Memory number appears for one second before the pulse rate is
displayed. The most recent reading set is numbered “1”.
• If the heart zone indicator is enabled, the heart zone indicator is displayed
with the readings.
• If the reading is high (refer to section 1.3), the “ ”
symbol appears.
• If there are no readings stored in the memory, the screen
to the right is displayed.
• If the memory is full, the monitor will delete the oldest
readings.
Alternating
date/time
display
To Next Page
Loading...
Need help?
General
