Omron BP629 - To Delete All Values Stored in the Memory

20
USING THE MEMORY FUNCTION
NOTES:•PresstheMEMbuttonrepeatedlytodisplaythenextvalues.
•PressandholdtheMEMbuttontodisplaythevaluesfaster.
The date and time are alternately displayed with the measurement values.
3. Press the START/STOP button to turn the monitor off.
TO DELETE ALL VALUES STORED IN THE MEMORY
You cannot partially delete values stored in the memory. All values will be deleted.
1. Press the START/STOP button to turn the monitor on.
2. While holding the MEM button, press the START/STOP button down for more than
5 seconds until the display appears as it does in the following illustration.
3. Press the START/STOP button to turn the monitor off.
NOTE: The monitor will automatically turn off after two minutes.