EasyManua.ls Logo

Omron BP7100CAN - Using the Monitor; Applying the Arm Cuff

Omron BP7100CAN
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
3. Using the Monitor
3.1 Applying the Arm Cuff
1. Insert the air plug into the air jack
securely.
2. Place your hand through the
cuff loop, then pull the cuff
until it reaches your upper left
arm.
The bottom edge of the arm cuff
should be 0.5 inch (1 to 2 cm) above
the elbow. Air tube is on the inside of
your arm and aligned with your middle
finger.
Caution
Remove tight-fitting, thick clothing from your arm
while taking a measurement.
0.5 inch
(1 - 2 cm)
Bottom edge

Related product manuals