Omron CK5M Series Startup Guide

37
7. Appendix Saving and Loading a Project
The following describes the procedures to save a Power PMAC IDE project on the computer, and to
reuse it.
7.1. Saving a Project
1
Creating a Configuration File
Create a Configuration File to save
parameters you have changed.
Right-click Configuration in the Solution
Explorer, and select Generate Config
File.
A Configuration File is added to
Configuration.
2
Enter a file name in the textbox, then click
the OK button.
3
Right-click on the Configuration File, and
from the menu, select Check To
Download Config File to include it in files
to be downloaded.

Omron CK5M Series Specifications

General

Brand	Omron
Model	CK5M Series
Category	Controller
Language	English