Omron CK5M Series Startup Guide

39
7.2. Loading and Downloading a Project
1
Start Power PMAC IDE, and
connect to the Controller.
2
In the Terminal tab page, type
the $$$*** command to reset the
Controller settings to factory
default.
3
In the File menu, click Open –
Project/Solution to load the
project that you saved.
4
Right-click Configuration in the
Solution Explorer, and select
Download Config Files to
download the file to the
Controller.

Omron CK5M Series Specifications

General

Brand	Omron
Model	CK5M Series
Category	Controller
Language	English