What to do if Omron Controller CX-Simulator Ladder Engine failed to start?
If the Omron Controller CX-Simulator Ladder Engine fails to start, it could be due to a wrong execution environment. Try these steps: 1. Exit any running application programs, keeping only the CX-Simulator active. 2. Uninstall and then reinstall the CX-Simulator.
General| Manufacturer | Omron |
|---|---|
| Category | Network Hardware |
| Mounting | DIN Rail |
| Type | PLC |
| Series | CS Series |
| Programming Language | Ladder Diagram, Instruction List, Function Block Diagram, Structured Text, Sequential Function Chart |
| Communication Ports | Ethernet |
| Protocols Supported | Modbus, Ethernet/IP |
| Power Supply | 24V DC or 100-240V AC |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -25°C to 65°C |
| Humidity Range | 10% to 90% (non-condensing) |
| Vibration Resistance | 10 to 57 Hz, 0.075 mm amplitude; 57 to 150 Hz, 1 G |
| Shock Resistance | 150 m/s² (15 G) in X, Y, and Z directions 3 times each |
To Next Page
