Omron E2C - Operation and Output Circuits; Output Circuit Diagrams

E2C
E2C
5
Operation
Output Circuits
Main
circuit
50 mA max.
2.2
#
47 V
Output (+)
Output (--)
E2C-AK4A (AC-switching Amplifier Unit)
Note:
Relay contact output is incorporated.
Main
circuit
2.2
#
47 V
47 V
200 mA max.
12 to 24 VDC
Output 1 (PNP)
Output 2 (NPN)
0V
E2C-AM4A (DC-switching Amplifier Unit)
E2C-GE4
j
(DC-switching Amplifier Unit) E2C-GF4
j
(DC-switching Amplifier Unit)
Main
circuit
4.7 k
#
47 V
100 mA
max.
12 to 24 VDC
Output
0V
2.2
#
Main
circuit
4.7 k
#
47 V
100 mA max.
12 to 24 VDC
Output
0V
2.2
#
E2C-JC4A (DC-switching Amplifier Unit) E2C-JC4AP
Main
circuit
12 to 24 VDC
Brown (Red)
Output
Black (White)
0V
Blue (Black)
47 V
2.2
#
Load
12 to
24 VDC
100 mA
max.
0V
Brown (Red)
Black
(White)
Output
Blue (Black)
Orange (Yellow)
Self-diagnostic
output (50 mA
max.)
Operation
indicator
Stability
indicator
(Red) (Green)
2.2
#
3.9
#
Z
D
:V
Z
=40 V
Main
circuit
Note:
Voltageoutput from E2C-GE4
j
will be available ifthe operation selector
is set to NC. When using voltage output, be sure to reset the E2C-GE4
j
after the E2C-GE4
j
isturned on, at which momentthe E2C-GE4
j
gen-
erates a pulse for approximately 60 ms. No such pulse is generated from
the E2C-GF4 with PNP output.
100 mA max.
E2C-WH4A (DC-switching Amplifier Unit) E2C-WH4AF
(DC-switching Amplifier Unit with Connector Output)
Main
circuit
12 to 24 VDC
0V
2.2
#
2.2
#
47 V
47 V
200 mA max.
Output 2 (PNP)
Output 1 (NPN)
12 to 24 VDC
0V
2.2
#
2.2
#
47 V
47 V
200 mA max.
Output 2 (PNP)
Output 1 (NPN)
2.2
#
47 V
50 mA max.
Connector output
Main
circuit