Omron E5 Z Series User Manual

95
Protect Level Section 5-2
5-2 Protect Level
Three levels of protection are provided on the E5CZ, operation/adjustment
protect, initial setting/communications protect, and setting change protect.
These protect levels prevent unwanted operation of the keys on the front
panel in varying degrees.
To move from the operation level to the protect level, press O and M keys
for three seconds (See note.) or more.
Note The time taken to move to the protect level can be adjusted by changing the
“Move to protect level time” parameter setting.
Parameters that are protected will not be displayed and their settings cannot
be changed.
Control in Progress
Operation
Level
Adjustment
Level
Protect
Level
Power ON
Press the
O Key less than 1 s.
Press the O + M
Keys for at least 1 s.
Press the O + M keys;
display will flash.
Press the O + M Keys
for at least 3 s. (See
note.)
25
100
C
Protect Level
M
M
M
oapt
0
icpt
1
wtpt
off
Page
Operation/Adjustment
Protect
Initial Setting/
Communications Protect
Setting Change Protect
96
96
96
96

Omron E5 Z Series Specifications

General

Brand	Omron
Model	E5 Z Series
Category	Temperature Controller
Language	English