Omron E5C-T Series User Manual

3 Part Names and Basic Procedures
3 - 10
E5@C-T Digital Temperature Controllers User’s Manual (H185)
*1 Set the PF Setting parameter to a-m (Auto/Manual).
*2 The No. 1 display will flash when the keys are pressed for 1 s or longer.
*3 Set the PF Setting parameter to pfdp (monitor/setting items).
Operation in progress
Stopped
Level changes automatically.
Communications
Setting Level
Advanced Function
Setting Level
Power ON
Advanced settings
Initial Setting Level
Communications settings
Operation Level
Monitor/Setting
Item Level
Press O Key
for at least 3 s.
*2
Press O and M Keys
for at least 1 s.
Starting in manual mode
Press S Key.
*3
Protect Level
Calibration Level
Manual
Control Level
Press O Key for less than 1 s.
Press O Key for at least 1 s.
Press O Key
for less than 1 s.
Adjustment
Level
PID Setting
Level
Press S Key.
*3
Control stops.
Used to set protection
for operations.
Press O and M Keys
for at least 3 s.
*2
Used to set the MV
manually.
Press O Key for at
least 3 s while a-m is
displayed.
*2
Press O
Key for at
least 1 s.
Press O or S Key
for at least 1 s.
*1
Used for SP and other
basic settings and
monitoring.
Press O Key for
less than 1 s.
Program
Setting Level
Parameter and
segment settings for
all programs
Press O Key for
less than 1 s.
Adjustment parameters
(e.g., PID constants for
current PID set)
Parameters for all
PID sets (e.g., PID
constants)
Used to display
specified monitor and
setting items.
Enter the password (1201)
for the Move to Calibration
Level parameter.
Release protection and then
enter the password (−169) for
the amoV (Move to Advanced
Function Setting Level)
parameter.
Used to set the input
type and other basic
settings.
Press O Key for less
than 1 s (only models
with communications).
Press S Key for at least 1 s.
*1

Omron E5C-T Series Specifications

General

Brand	Omron
Model	E5C-T Series
Category	Temperature Controller
Language	English