Omron E5CC Communications Manual

6 Programless Communications
6 - 60
E5@C Digital Temperature Controllers Communications Manual (H175)
(5) We will write set values to the PLC.
Some dialog boxes will be displayed before and after the following dialog box. Click the Yes
Button for of them, or click the Yes to All Button.
When the following dialog box is displayed, click the Close Button. Also close the dialog
box to write set values, and then cycle the power supply to the PLC.
This completes the PLC setup procedure. You will use GX Works2 to check operation, so
leave it online.
Set up programless communications. Perform the procedure that is given in 6-4-4 E5
@ C Controller
Setup.
6-8-4 E5@C Controller Setup

Omron E5CC Specifications

General

Number of Display Digits	4 digits
Number of Control Outputs	1
Control Method	ON/OFF
Input Type	Thermocouple, RTD, Analog voltage, Analog current
Supply Voltage	100 to 240 VAC
Output Type	Relay, Voltage, Current
Display Type	LCD
Size	48 x 48 mm
Mounting Method	Panel mount
Control Output	Relay, Voltage, Current
Alarm Output	Relay
Communication	RS-485
Ambient Operating Temperature	-10 to 55°C
Ambient Operating Humidity	25% to 85% RH
Protection Rating	IP66