VI
CAUTION
Tighten the terminal screws to between 0.74 and 0.9 N.m. Loose
screws may occasionally result in fire.
Set the parameters of the product so that they are suitable for the
system being controlled. If they are not suitable, unexpected
operation may occasionally result in property damage or
accidents.
WARNING: To reduce the risk of electric shock or fire, install the
product in a controlled environment relatively free of
contaminants.
A malfunction in the Temperature Controller may occasionally
make control operations impossible or prevent alarm outputs,
resulting in property damage. To maintain safety in the event of
malfunction of the Temperature Controller, take appropriate safety
measures, such as installing a monitoring device on a separate
line.
To Next Page
Loading...
