Omron fh series - Page 39

35
When 32-byte data cannot be
transmitted/received four
times and PING command
timed out, check whether or
not the robot controller is
turned on, the wiring was
correctly done, or
communication settings are
correct.
5
(Operation of the PC)
Execute PING command to the
IP address of the Vision Sensor.
6
(Operation of the PC)
When 32-byte data could be
successfully
transmitted/received four
times like the right figure, that
means that the
communications have been
established and the wiring and
settings of Ethernet is correctly
done.
When 32-byte data cannot be
transmitted/received four
times and PING command
timed out, check whether or
not the robot controller is
turned on, the wiring was
correctly done, or
communication settings are
correct.