Omron fh series Connection Guide

15
3D Software OMRON 3D Robot Vision
Software Installer
FH-UM3D1 -
Robot controller
DENSO
Robot controller
RC8A
Ver.2.1.0
Robot DENSO Vertical multi-
joint robot
VS-068 -
Teaching pendant DENSO Teaching pendant TP-RC7/8 -
PC software OMRON Data set output
tool for 3D robot
vision
- Ve r. 1 . 10 or later
Please contact
us for how to
obtain it.
DENSO WINCAPS III - -
Switching Hub OMRON Switching Hub for
industrial
W4S1-□□□ Recommended
product
USB memory OMRON USB memory FZ-MEM8G Recommended
product
Precautions for Correct Use
Do not use any d
evice except mentioned above for each device of the system
configuration.
Additional Information
This manual does not provide operations, installation, and wiring methods for each
device.
For details, refer to manuals noted in Related Manuals.

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB