EasyManua.ls Logo

Omron Focus PM710-M - Device Preparation and Charging; Initial Inspection Before Charging

Omron Focus PM710-M
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
Before using the device, inspect to ensure that:
1. The pad is not damaged.
2. The device is intact.
3. The AC adapter is not broken or damaged.
If you are using the device for the first time or the device has not been used for
more than 3 months, charge the battery to full.
Once fully charged, the battery will last for approximately 10 uses (1 use: 30
minutes). Once the battery has been depleted, it takes about 8 hours to charge.
Temperature while battery is charging should be +41 to +95 °F (+5 to +35 °C).
If the device and pad are connected:
Remove the device from the pad before
charging the battery.
While pressing the pad release button, lift the
device.
Pad releas
e
button
1
Insert the AC adapter plug into the
AC adapter jack on the charger.
Charger
2. Preparation
2.1 Charging

Related product manuals