EasyManua.ls Logo

Omron H5CC - Page 7

Omron H5CC
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
H5CC
77
Characteristics
* Refer to Electrical Life Test Curve.
Electrical Life Test Curve (Reference Values)
Accuracy of operating time and setting error
(including temperature and voltage
influences)
Po
wer-ON start: ±0.01%±0.05 s max. *1
Signal start: ±0.005%±0.03 s max. *1
Signal start for transistor output model: ±0.005%±3 ms max. *1 *2
If the set value is within the sensor waiting time at sta
rtup the control output of the H5CC will not turn ON until the
sensor waiting time passes.
*1. The va
lues are based on
the set value.
*2. The value is applied for a minimum input signal width of 1 ms.
Insulation resistance
100 MΩ min. (at 500 VDC)
between current-carrying terminal and exposed non-current-carrying metal parts, between non-continuous contacts
Dielectric strength
2,900 VAC, 50/60 Hz for 1 min between current-carrying terminal and operating section
2,000 VAC, 50/60 Hz for 1 min between power supply an
d input circuits
for models other than the H5CC-A11F and H5CC-L8E@
(1,500 VAC for 12 to 48 VDC/24 VAC)
1,500 VAC, 50/60 Hz for 1 min between control output, power supply,
and inpu
t circuits
(for models other than the H5CC-L8E@) for H5CC
-@SD
2,000 VAC, 50/60 Hz for 1 min between control output, power supply,
and input circuits (for models other than the H5CC-L8E@) fo
r othe
r models
1,000 VAC, 50/60 Hz for 1 min between non-continuous contacts
Impulse withstand voltage
5 kV (between power terminals) for 100 to 240 VAC, 1.0 kV for 24 VAC/12 to 48 VDC
7.4 kV (between current-carrying terminal and operating section)
Static immunity
Malfunction: 8 kV
Destruction: 15 kV
Vibration resistance
Destruction 10 to 55 Hz with 0.75-mm single amplitude each in three directions for 2 h each
Malfunction 10 to 55 Hz with 0.35-mm single amplitude each in three directions for 10 min each
Shock resistance
Destruction 300 m/s
2
in three directions, three cycles
Malfunction 100 m/s
2
in three directions, three cycles
Life expectancy
Mechanical
10,000,000 operations min.
(under no load at switching frequency of 1,800 operations/h and ambient temperature of 23°C)
Electrical
100,000 operations min.
(5 A at 250 VAC, resistive load at 1,800 operations/h and ambient temperature of 23°C) *
Weight Approx. 115 g (Timer only)
30 VDC L/R = 7 ms
250 VAC/30 VDC
cosI = 1
250 VAC cosI = 0.4
0 1 2 3 4 5
1,000
500
100
50
10
Switching operations (× 10
4
)
Load current (A)
A maximum current of 0.15 A can be switched at 125 VDC (cosφ =1)
and a maximum current of 0.1 A can be switched if L/R is 7 ms.
In both cases, a life of 100,000 operations can be expected.

Related product manuals