37
H7CXH7CX
Applicable Two-wire Sensor
Leakage current: 1.5 mA max.
Switching capacity: 5 mA min.
Residual voltage: 3 VDC max.
Operating voltage: 10 VDC
Voltage Inputs (PNP Inputs)
Voltage Input Signal Levels
High level (Input ON): 4.5 to 30 VDC
Low level (Input OFF): 0 to 2 VDC
Maximum applicable voltage: 30 VDC max.
Input resistance: Approx. 4.7 k
W
Accessories (Order Separately)
Note: All units are in millimeters unless otherwise indicated.
6 7 8 9
3 7 5 6
10
4
6 7 8 9
3 7 5 6
10
4
Sensor
H7CX-A@
Operates when the transistor turns ON.
H7CX-A11@
No-contact Input
(NPN Transistor)
No-contact Input
(PNP Transistor)
Contact Input
Sensor
H7CX-A@
Operates when the transistor turns OFF.
H7CX-A11@
H7CX-A@
Operates when the contact turns ON.
H7CX-A11@
Input
Reset/reset 1 input
CP2 input
CP1 input
0V
Total reset/reset 2 input
Input
Reset/reset 1 input
CP2 input
CP1 input
0V
Total reset/reset 2 input
Input
Reset/reset 1 input
CP2 input
CP1 input
0V
Total reset/reset 2 input
Track Mounting/Front Connecting Socket
P2CF-11
Terminal Arrangement/
Internal Connections
(Top View)
Surface Mounting Holes
Two, 4.5 dia. or two, M4
40±0.2
Two, 4.5-dia.
holes
Eleven,
M3.5 x 7.5 sems
70 max.
50 max.
31.2 max.
7.8
3
4.5
35.4
4
P2CF-11-E (Finger Safe Terminal Type)
Conforming to VDE0106/P100
Two, 4.5-dia.
holes
Eleven,
M3.5 x 7.5 sems
7.8
70 max.
4
40±0.2
50 max.
35.4
31.2 max.
30
5
4.5
3
1.2
Note: Track mounting is also possible.
To Next Page
Loading...
