13
BATTERY INSTALLATION
1. Open the Battery Cover on the back of the unit.
1) Press the tab on the battery cover in the
direction of the arrow to release the cover as
illustrated.
2) Pull the tab of the cover upwards.
2. Insert the battery by aligning them as indicated.
The end with the spring is for the negative (–) terminal.
3. Close the battery cover.
1) Align the hooks on the battery cover with the
slots in the battery compartment.
2) Push the battery cover until the tab clicks into
place.
BATTERY LIFE AND REPLACEMENT
Measurement values and personal profiles stored in the
memory will not be deleted during battery replacement.
When the Battery Low Indicator appears on the display
screen, remove all four batteries.
Replace with four new batteries at the same time.
NOTES:
• New batteries will last for approximately one year (when manganese batteries are used with four
measurements a day at a room temperature of 23°C). Trial batteries supplied with the unit may have a
shorter life.
• Remove the batteries if you do not intend to use the unit for a period of three months or longer before
placing in storage.
• Dispose of the device, batteries, components and optional accessories according to applicable local
regulations.
Back of the unit
1)
2)
Battery Low
Indicator
HBF-202-AUW_A_M.fm Page 13 Monday, November 22, 2010 4:35 PM
To Next Page
Loading...
