17
SETTING THE MEASUREMENT WRIST
The monitor is designed to take measurements on the left wrist or the right
wrist. The monitor is set to OFF to take measurements on the left wrist at
the time of purchase.
1. TO CHANGE THE SETTING
Press the START/STOP button
to turn the power off, then press
the SET button three (3) times.
The Right Wrist Measurement symbol
( ) will appear on the display.
2. SELECTING ON OR OFF
Press the MEM button to change the wrist setting to ON to take
measurements on the right wrist.
Press the MEM button again to change the wrist setting to OFF to take
measurements on the left wrist.
3. CONFIRM THE SETTING
Press the START/STOP button to confirm the measurement wrist you
selected and to turn the monitor off.
To Next Page
Loading...
