2. Preparation
10
5. Confirm if the device is connected
successfully.
When the device is connected successfully to the smartphone,
“OK” symbol and the display shown on the right will flash.
The monitor will automatically turn off without any operations.
The date and time settings of your smartphone will automatically sync with the device
when paired.
When “Err” appears, refer to “Connection failure.” in section
4.2 for more detail.
Notes:
• You can pair up to 4 destination smartphones with the monitor.
• When paired with 5 or more smartphones, any information previously stored
in your device will be overwritten.
• Any readings currently saved in the blood pressure monitor’s memory will automatically be transferred to
the app after successful completion of the pairing process.
HEM-7280T-AP_B_M.fm Page 10 Tuesday, October 13, 2015 2:51 PM
To Next Page
Loading...
Need help?
General
