2. Preparation
11
To Set the Date and Time Manually
The date and time will be automatically set when paired with your smartphone. To set
manually, follow the instructions below.
1. Press the connection button.
1 The connection symbol ( ) and the “ ” flashes on
the device’s display. You can transfer the data, and
refer to “To Transfer the Data” (page 15).
2 The connection symbol ( ) and the “P” flashes on
the device’s display. You can pair this device with
your smartphone, and refer to “Pairing this Device with a Smartphone” (page 8).
2. Then press the connection button again.
The year flashes on the Date/Time display.
3. Push or button to change the year.
Push button to confirm the year and then the month flashes. Repeat the same
steps to change the month, day, hour, and minute.
4. Press the START/STOP button to turn the monitor off.
12
Year Month Day Hour Minute
Change Confirm Change Confirm Change Confirm Change Confirm Change Confirm
: Back : Forward
HEM-7280T-AP_B_M.fm Page 11 Thursday, October 15, 2015 4:45 PM
To Next Page
Loading...
Need help?
General
