Before Using The Unit 5
How to Start
1. Turn on the pedometer by pulling
out the insulation film.
2. Attach the unit securely to your belt,
trousers, skirt, or jersey pants with
the clip.
3. Push out the tab forward to open
the front case. Press the RESET
Button to reset the number on
the display to 00000. Close the
front case.
4. Walk 100 steps to check if the
pedometer counts the number of
steps correctly.
If there’s any discrepancy between
the number of steps you take and
the number shown on the display,
adjust the sensitivity accordingly.
(Refer to Page 6.)
How To Use The Unit
EN-02-10[HJ-005]_new 2/13/09, 4:31 PM5
To Next Page
Loading...
