Maintenance
To protect your scale from damage, follow the directions below:
• Use a soft dry cloth, or a soft cloth moistened with mild (neutral) detergent to clean the scale.
• Use a soft cloth moistened with rubbing alcohol to clean the plate.
• Store the scale in a clean, safe location.
• Do not use any abrasive or volatile cleaners, gasoline, thinners or similar solvents to clean the scale.
• Do not clean the scale by immersing it in water.
Proper storage
The scale recalibrates automatically when it is not in use. If the automatic calibration does not work, see “Calibration”
section for instructions on how to manually calibrate your scale. To help ensure automatic calibration, do not store
your scale as shown in images below:
The scale is leaning against
the wall or other objects
The scale is placed upside
down
The scale is placed on a
carpet or mat
Any objects are placed on
the scale
14
Maintenance
Calibration
To calibrate your scale, follow the instructions below.
1
Place the scale on a hard, flat and level floor.
2
Press the surface of the scale with your hand to turn on the power.
Then immediately release your hand from the scale.
3
When “0.0 kg” (or “0.0 lb”, “0.0 st”) is displayed, wait for 1 minute to turn the scale off.
Then you can take a measurement.
To Next Page
Loading...
