23180-000 Rev A Mobile Robot LD, LD-CT Assembly Instructions 5
Programmable Products
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any
consequence thereof.
Performance Data
Data presented in Omron Company websites, catalogues and other materials is provided as a guide for the
user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test
conditions, and the user must correlate it to actual application requirements. Actual performance is subject
to the Omron’s Warranty and Limitations of Liability.
Change in Specifications
Product specifications and accessories may be changed at any time based on improvements and other
reasons. It is our practice to change part numbers when published ratings or features are changed, or when
significant construction changes are made. However, some specifications of the Product may be changed
without any notice. When in doubt, special part numbers may be assigned to fix or establish key
specifications for your application. Please consult with your Omron’s representative at any time to confirm
actual specifications of purchased Product.
Errors and Omissions
Information presented by Omron Companies has been checked and is believed to be accurate; however, no
responsibility is assumed for clerical, typographical or proofreading errors or omissions.
Note:
Even if it conforms to all instructions in this safety guide, it isn't possible to
guarantee that a robot system will be free from an accident resulting in injury or
death or considerable damage to property caused by the industrial robot. It is
the customer's responsibility to implement appropriate safety measures based on
their own risk assessment.
To Next Page
Loading...
Need help?
General
