13
4. Troubleshooting and Maintenance
EN
Cuff is under inflated.
Carefully read and repeat the steps listed
under section 3.3.
Movement during measurement.
Cuff over inflated.
Device error.
Contact your OMRON retail outlet or
distributor.
Refer to Chapter 6.
Pressure is too low.
Press the inflation bulb to inflate the arm
cuff until the reinflation symbol goes out.
Or, deflate the arm cuff and repeat
measurement after checking that the
heartbeat symbol ( ) has been displayed.
Refer to section 3.3.
Error Display Cause Remedy
HEM-4030-E_A_M_all.book 13 ページ ２０１１年１１月１８日 金曜日 午後４時５０分
To Next Page
Loading...
