Omron M1 - Using the Memory Function

10
3. Using the Unit
3.4 Using the Memory Function
The monitor automatically stores the result up to 14 sets.
Note:
If the memory is full, the monitor will delete the oldest readings.
Previous Reading
Turn the Unit on View Previous
Reading
• The Memory number
appears for a second
before the pulse rate is
displayed. The newest
set is numbered “1”.
View Readings
Stored in Memory
• Press repeatedly to
cycle through the
previous results.
• Hold down to cycle
rapidly.
HEM-4030-E_A_M_all.book 10 ページ ２０１１年１１月１８日 金曜日 午後４時５０分