17
4. Troubleshooting and Maintenance
EN
4.4
Storage
Keep the unit in its storage case when not in use.
Do not keep the main unit being wound with the arm cuff.
1. Unplug the air tubes from the air connector.
2. Gently fold the air tube into the arm cuff.
Note:
Do not bend the air tube excessively.
3. Place the arm cuff, inflation bulb and main
unit in the storage case.
Do not store the unit in the following situations:
• If the unit is wet.
• Locations exposed to extreme temperatures, humidity, direct
sunlight, dust or corrosive vapours.
• Locations exposed to vibrations, shocks or where it will be at an angle.
HEM-4030-E_A_M_all.book 17 ページ ２０１１年１１月１８日 金曜日 午後４時５０分
To Next Page
Loading...
