Omron M3 Intellisense User Manual

16
3.Using the Unit
3.2
Applying the Arm Cuff
Be sure to wrap the arm cuff correctly so that you get accurate
results.
Measurements can be taken in light clothing. However, please
remove thick clothes, such as sweaters, before taking a
reading.
1.
Insert the air plug into the air jack on
the left side of the main unit.
2.
Put your left arm through the cuff
loop.
The air tube should run down the
inside of your forearm and be in line
with your middle finger.
Note:
If the cuff is not assembled,
pass the end of the cuff
furthest from the tubing
through the metal D-ring to
form a loop. The smooth cloth
should be on the inside of the
cuff loop.
HEM-7051_E_main.book Page 16 Friday, August 29, 2008 11:24 AM

Omron M3 Intellisense Specifications

General

Model	M3 Intellisense
Category	Blood Pressure Monitor
Cuff Size	22-42 cm
Memory Capacity	60 readings
Display	LCD
Power Source	4 x AA batteries
Clinically Validated	Yes
Average Reading	Yes (last 3 readings)
Measurement Method	Oscillometric
Measurement Range (Pressure)	0-299 mmHg
Features	Irregular Heartbeat Detection
Measurement Range (Pulse)	40-180 bpm
Number of Users	2