Omron M3 Intellisense User Manual

22
3.Using the Unit
3.4
Instructions for special conditions
If your systolic pressure is known to be more than 220 mmHg,
press and hold the O/I START button until the arm cuff inflates
30 to 40 mmHg higher than your suspected systolic pressure.
1.
Press the O/I START button to turn
the unit on.
Measurement starts.
2.
When the cuff starts to inflate, press the O/I START button and
keep it pressed until the pressure is 30 to 40 mmHg higher than
your suspected systolic pressure.
Note:
You cannot inflate the cuff above 299 mmHg. (An error
will be displayed if you try to inflate the cuff above
300 mmHg.)
3.
Release the O/I START button when the cuff has been inflated
to the desired pressure.
The cuff starts to deflate and measurement starts.
4.
The rest of the procedure is the same as for normal
measurement. Refer to 3.3, steps 2 to 4.
Note:
Do not apply more pressure than necessary.
HEM-7051_E_main.book Page 22 Friday, August 29, 2008 11:24 AM

Omron M3 Intellisense Specifications

General

Model	M3 Intellisense
Category	Blood Pressure Monitor
Cuff Size	22-42 cm
Memory Capacity	60 readings
Display	LCD
Power Source	4 x AA batteries
Clinically Validated	Yes
Average Reading	Yes (last 3 readings)
Measurement Method	Oscillometric
Measurement Range (Pressure)	0-299 mmHg
Features	Irregular Heartbeat Detection
Measurement Range (Pulse)	40-180 bpm
Number of Users	2