Omron M3 Intellisense User Manual

8
2.Preparation
2.
Preparation
2.1
Installing/Replacing the Batteries
1.
Turn the main unit upside down.
2.
Slide the battery cover in the
direction of the arrow while
pressing the ribbed part of the
cover.
3.
Install or replace four “AA” size
batteries so that the + (positive)
and - (negative) polarities
match the polarities indicated
on the battery compartment.
4.
Put the battery cover back in
place.
Slide the battery cover as indicated, until it clicks into place.
Note:
The measurement values continue to be stored in
memory even after the batteries are replaced.
HEM-7051_E_main.book Page 8 Friday, August 29, 2008 11:24 AM

Omron M3 Intellisense Specifications

General

Model	M3 Intellisense
Category	Blood Pressure Monitor
Cuff Size	22-42 cm
Memory Capacity	60 readings
Display	LCD
Power Source	4 x AA batteries
Clinically Validated	Yes
Average Reading	Yes (last 3 readings)
Measurement Method	Oscillometric
Measurement Range (Pressure)	0-299 mmHg
Features	Irregular Heartbeat Detection
Measurement Range (Pulse)	40-180 bpm
Number of Users	2