Omron M3 Intellisense User Manual

24
3.Using the Unit
2.
Press the MEMORY button again,
while the average values screen is
displayed.
The result from the most recent
measurement is displayed.
The date and time of each
measurement is displayed
alternately with the measurement
values.
Important:
If your systolic or
diastolic pressure is
outside the standard
range, the heartbeat
symbol will blink when
the measurement result is displayed.
Refer to 3.3, number 2.
3.
Press the MEMORY button
repeatedly to cycle through the
previous measurement results.
Keep the button pressed down to
cycle rapidly through the previous
results.
If the irregular heartbeat symbol was displayed at the time of a
measurement, this is displayed when that result is displayed.
4.
Press the O/I START button to turn the unit off.
If you forget to turn the unit off, it will automatically shut itself off
after five minutes.
HEM-7051_E_main.book Page 24 Friday, August 29, 2008 11:24 AM

Omron M3 Intellisense Specifications

General

Model	M3 Intellisense
Category	Blood Pressure Monitor
Cuff Size	22-42 cm
Memory Capacity	60 readings
Display	LCD
Power Source	4 x AA batteries
Clinically Validated	Yes
Average Reading	Yes (last 3 readings)
Measurement Method	Oscillometric
Measurement Range (Pressure)	0-299 mmHg
Features	Irregular Heartbeat Detection
Measurement Range (Pulse)	40-180 bpm
Number of Users	2