Omron NP3 Series

4-4 Creating Screens
4
4
54 NP Introduction Manual
Creating Screens
6. Click .
You will see the [Input] dialog box.
7. Select [WR] from the [Area] drop-down list. Enter "0" for [Word], "2" for
[Bit]. Push the [Enter] key.
The [Input] dialog box will close. [Read Address] will be [SERIALA:WR00000.02].
8. Click the [Style] input field. Select [Invisible] from the drop-down list.
The button frame will show with dotted lines.