Omron NX-SL3500

Related Manuals
The followings are the manuals related. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NX-series
Safety Control Unit
User's Manual
Z930
NX-SL££££
NX-SI££££
NX-SO££££
Learning how to use
NX-series Safety
Control Units.
Describes the hardware, setup methods,
and functions of the NX-series Safety Con-
trol Units.
NX-series
Safety Control Unit
Instructions Reference Man-
ual
Z931
NX-SL££££
Learning about the
specifications of in-
structions for the
Safety CPU Unit.
Describes the instructions for the Safety
CPU Unit.
NX-series
Data Reference Manual
W525
NX-££££££
Referencing lists of
the data that is re-
quired to configure
systems with NX-ser-
ies Units.
Lists of the power consumptions, weights,
and other NX Unit data that is required to
configure systems with NX-series Units are
provided.
Sysmac Studio Version 1
Operation Manual
W504 SYSMAC
-SE2£££
Learning about the
operating procedures
and functions of the
Sysmac Studio.
Describes the operating procedures of the
Sysmac Studio.
NJ/NX-series
T
roubleshooting Manual
W503
NX701-££££
NX102-££££
NX1P2-££££
NJ501-££££
NJ301-££££
NJ101-££££
Learning about the
errors that may be
detected in an
NJ/NX-series Con-
troller
.
Concepts on managing errors that may be
detected in an NJ/NX-series Controller and
information on individual errors are descri-
bed.
NX-series
EtherCAT
®
Coupler Unit
User
’s Manual
W519
NX-ECC£££
Learning how to use
the NX-series Ether-
CAT Coupler Unit
and EtherCAT Slave
Terminals.
The following items are described: the
overall system and configuration methods
of an EtherCAT Slave Terminal (which con-
sists of an NX-series EtherCAT Coupler
Unit and NX Units), and information on
hardware, setup, and functions to set up,
control, and monitor NX Units through
EtherCAT.
NX-series
EtherNet/IP
™
Coupler Unit
User’
s Manual
W536
NX-EIC£££
Learning how to use
an NX-series Ether-
Net/IP Coupler Unit
and EtherNet/IP
Slave Terminals.
The following items are described: the
overall system and configuration methods
of an EtherNet/IP Slave Terminal (which
consists of an NX-series EtherNet/IP Cou-
pler Unit and NX Units), and information on
hardware, setup, and functions to set up,
control, and monitor NX Units.
NX-series
System Units
User’
s Manual
W523
NX-PD1£££
NX-PF0£££
NX-PC0£££
NX-TB£££X
Learning how to use
NX-series System
Units
The hardware and functions of the NX-ser-
ies System Units are described.
NX-series
NX102 CPU Unit
Hardware
User
’s Manual
W593
NX102-££££
Learning the basic
specifications of the
NX102 CPU Units,
including introductory
information, design-
ing, installation, and
maintenance.
Mainly hardware in-
formation is provided.
An introduction to the entire NX102 system
is provided along with the following infor-
mation on the CPU Unit.
• Features and system configuration
• Introduction
• Part names and functions
• General specifications
• Installation and wiring
• Maintenance and Inspection
Related Manuals
37
NX-series Safety Control Unit User's Manual (Z930)