Functional Differences on the Sysmac Studio Based on the Con-
nection Point
The functions that you can use on the Sysmac Studio depend on what the Sysmac Studio is connect-
ed to. Refer to the NX-series EtherCAT Coupler Unit User
’s Manual (Cat. No. W519) for details.
1-3-3
Connection Method and Procedures for EtherNet/IP Coupler
Units
Connect the Sysmac Studio to the USB port on the EtherNet/IP Coupler Unit.
This connection allows you to download, upload, and monitor the safety programs for only the
Safety
CPU Unit and
Safety I/O Units that are under the EtherNet/IP Coupler Unit that the Sysmac Studio is
online with. The other devices cannot be accessed.
Safety Control System
in EtherNet/IP Slave Terminals
USB
Coupler
Unit
Safety
CPU
Unit
Safety Control System
Sysmac Studio
Only the Safety I/O Units
mounted under the Safety CPU
Unit are accessible.
The Safety I/O Units mounted under
the other Communications Coupler
Unit cannot be accessed.
Safety Output
Safety Input
Coupler
Unit
Safety
CPU
Unit
Safety Output
Safety Input
EtherNet/IP
1 Overview
1 - 14
NX-series Safety Control Unit User's Manual (Z930)
To Next Page
Loading...
