Omron NX-SL5500

2 Click Configuration information only or Configuration + Unit operation settings + Unit
application data..
An execution confirmation dialog box for Transfer to Coupler
is displayed.
For both options, only the Slave Terminal configuration information is transferred to the Com-
munications Coupler Unit and the Safety CPU Unit because safety validation has not been per-
formed for the safety program.
3 Click the Yes Button.
The settings are transferred to all Units that are connected to the Communications Coupler
Unit.
7 Checking Operation and Actual Operation
7 - 10
NX-series Safety Control Unit User's Manual (Z930)