21
2. Installation and connection
(2) Install the unit.
● Do not use this unit in any position other than the “proper positions” indicated in the illustration below.
Write the usage start date on the label on the side. Also, by using the included UPS monitoring
software, possible to keep a record of usage start date by the software.
Vertical Proper positions
Horizontal
Improper positions
The left surface in on the
bottom.
The front surface in on
the bottom.
The back surface in on
the bottom.
* Attach the rubber feet to each of the four corners on the bottom surface of the unit.
To Next Page
Loading...
