50
Sensor Terminal
SRT1-jD08S
Connector Connection Models that
Allows Easy Connection to Sensors and
Output Devices
Sensors with easy-to-wire connectors are easily
attached or detached.
Connects to 2-wired sensors.
Remote
teaching of the Sensor T
erminal is possible
with the PC by using output signals of the Sensor
Terminal.
DIN track mounting and screw mounting are
available.
Ordering Information
Classification Internal
I/O circuit common
I/O points
Model
For input
NPN (– common)
8 input points
SRT1-ID08S
For I/O NPN (– common)
4 input/4 output points
SRT1-ND08S
For output
NPN (– common)
8 output points
SRT1-OD08S
Specifications
Ratings
Input
Item SRT1-ID08S/-ND08S
Input
current
10 mA max./point
ON delay time
1 ms max.
OFF delay time
1.5 ms max.
ON voltage
12 VDC min. between each input terminal and V
CC
, the external sensor power supply
OFF voltage
4 VDC max. between each input terminal and V
CC
, the external sensor power supply
OFF current
1 mA max.
Insulation method
Photocoupler
Input indicator
LED (yellow)
Output
Item SRT1-ND08S SRT1-OD08S
Rated output current
20 mA/point 30 mA/point
Residual voltage
1 V max.
0.6 V max.
ON delay time
1 ms max.
---
OFF delay time
1.5 ms max.
---
Leakage current
0.1 mA max.
Insulation method
Photocoupler
Output indicator LED (yellow)
To Next Page
Loading...
