Omron SRM1-C01-V2 - General Specifications

81
Position Driver
FND-Xj-SRT
Advanced Servodrivers with Positioner
Functions
DIO and CompoBus/S Models are Newly
Added
Servodriver and positioner are combined into one
Unit.
Conventional U-series, U-series UE type, H-series,
and M-series AC Servomotors can be used.
Feeder control/DTP control and single operation/
automatic incremental/continuous operation are
available.
Easy to set, operate, and adjust.
Ordering Information
Specifications Model
CompoBus/S models For 200-V AC input
6 A FND-X06H-SRT
Co o us/S ode s
o00 Cu
12 A FND-X12H-SRT
25 A FND-X25H-SRT
50 A FND-X50H-SRT
For 100-V AC input
6 A FND-X06L-SRT
o00 Cu
12 A FND-X12L-SRT
Note: For details, refer to OMNUC FND-X-series User’ s Manual (I524) .
Specifications
General Specifications
Ambient temperature Operating: 0° C to 55 °C
Storage: –10° C to 70 °C
Ambient humidity Operating: 35% to 90% (with no icing)
Storage: 35% to 90% (with no icing)
Operating atmosphere No corrosive gases
Dielectric strength 1,500 V AC
RMS
for 1 min at 50/60 Hz
Insulation resistance 5 M Ω min. (at 500 VDC) between power input terminals and between the power terminal and
the case
V ibration resistance 10 to 150 Hz in X, Y , and Z directions with 0.10-mm single amplitude; acceleration: 9.8 m/s
2
max.; time coefficient: 8 min; 4 sweeps
Shock resistance 98 m/s
2
max., three times each in X, Y, and Z directions
Degree of protection Built into panel (IP00)