SRT1-jjD04S
SRT1-jjD04S
61
Specifications
Characteristics
CompoBus/S Sensor Amplifier Terminals
Item Communication
T
erminals
Expansion T
erminals
Model SRT1-TID04S SRT1-TKD04S SRT1-XID04S SRT1-XKD04S
Communications power
supply voltage
14 to 26.4 VDC (See note 1)
--- ---
I/O points
4 input points
Connected sensors
T
otal of four E3X-NT
j6
or E39-JID01
(See note 2)
One E3X-NM16
(See note 2)
T
otal of four E3X-NT
j6
or E39-JID01
One E3X-NM16
Current consumption
60 mA max. (See note 3) 10 mA max. (See note 3)
Dielectric strength
500 V
AC for 1 min (1-mA sensing current between insulated circuits)
Noise immunity
Power supply normal:
±
600 V for 10 minutes with a pulse width of 100 ns to 1
µs
Power supply common:
±
1,500 V for 10 minutes with a pulse width of 100 ns to 1
µs
V
ibration resistance
10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
Malfunction:
200 m/s
2
Destruction:
300 m/s
2
Mounting method
M4 screw mounting or 35-mm DIN track mounting
Mounting strength
No damage when 50 N pull load was applied for 10 s in all directions
(except the DIN track directions and a pulling force of 10 N
T
erminal strength
No damage when 49 N pull load was applied for 10 s in all directions.
T
ighten each screw to a torque of 0.6 to 1.18 N
S
m.
Ambient temperature
Operating: 0°
C to 55
°
C (with no icing or condensation)
Storage: –20°
C to 65
°
C (with no icing or condensation)
Ambient humidity
Operating:
35% to 85%
Weight
70 g max. 65 g max. 45 g max. 35 g max.
Note: 1.
The communications power supply voltage
must be 20.4 to 26.4 VDC if the T
erminal is connected to 2-wired proximity sensors.
2.
When adding Connector Units, use SR
T1-XID04S or SR
T1-XKD04S.
3.
The value doesn’t include the current consumption of Connector Units.
With E3X-N Connectors
Model E3X-NH16 E3X-NT16 E3X-NT26 E3X-NM16
Current
consumption
75 mA max. 50 mA max.
150 mA
Response time
1 ms max. (4.0 ms max.
when connected to the
SRM1-jjD04S)
500
µ
S max. (2.0 ms max. when connected to the SR
T1-jjD04S)
T
imer function
Not available
OFF-delay timer (fixed to 40 ms)
Remote teaching input
Not available
A
vailable (Remote teaching disabled)
Indicator
Orange LED:
Lit during output operation
Green LED:
Lit with stable light reception or no light
T
eaching confirmation
function
Indicators (red/green LED) and buzzer
Output Light ON and Dark ON switch selectable
Ambient illumination
Sunlight: 10,000 lux max.; incandescent lamp: 3,000 lux max.
Insulation resistance
20 M
Ω
max. (at 500 VDC)
Dielectric strength
1,000 V
AC at 50/60 Hz for 1 min
V
ibration resistance
Destruction:
10 to 55 Hz, 1.5-mm double amplitude
Shock resistance
Destruction:
500 m/s
2
Mounting method
Connector connection to the SR
T1-jjD04S
Mounting strength
No damage when 49 N pull load was applied for 10 s in all directions
Ambient temperature
Operating: 0°
C to 55
°
C (with no icing or condensation)
Storage: –20°
C to 65
°
C (with no icing or condensation)
Ambient humidity
Operating:
35% to 85%
Weight
30 g max. 30 g max. 30 g max. 60 g max.
To Next Page
Loading...
