Item Description Comments
Network Settings(ROM) If the Amplifier Unit is set to use the IP address that is set in ROM,
this item is displayed in blue, and the IP address and subnet mask
of the Amplifier Unit are displayed.
If the Amplifier Unit is set
to use the IP address that
is set in ROM, this item is
grayed out.
IP Address
Subnet Mask
(3) Last Command Information
Item Description Comments
Latest Communication The last command code that was executed and the last response
code that was returned by the Amplifier Unit are displayed.
Nothing is displayed if a
command has not been
executed since the Ampli-
fier Unit was started.
Command Code
Response Code
(4) Communications History Information
Item Description Comments
Communication History History information on communications with the ID Tags is displayed
Total Total number of communications
Success Total number of successful communications
Error Total number of failed communications
(5) Hardware Information
Item Description Comments
H/W Status Hardware information is displayed. OK is displayed for nor-
mal status.
Memory Error is displayed if a memory error was detected during the memo-
ry check at startup.
Antenna Error is displayed if an error is detected in the CID Head that is con-
nected to the Amplifier Unit (or if a CID Head is not connected).
3 V640 Utility Tool Features
3-4
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)
To Next Page
Loading...
Need help?
General
