Command sent to
Amplifier Unit
Transmitted Data
Received Data
Response Code
Only "visible ASCII" characters can be used to read and write data on the CID R/W Tab Page. If char-
acters that are not "visible ASCII" characters are detected for a
"CID read", they will be converted to
asterisks "*".
Characters that are not visible ASCII
characters are converted to "*".
3-4-2
V640 Command
The V640 Command Window allows you to read and write data according to the command format of
the Amplifier Unit.
3 V640 Utility Tool Features
3-8
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)
To Next Page
Loading...
