OK/NG Display Area
Page/Write Designation Area
Page Designation Area
Write Data Designation Area
Send Button
Repeat
Communications Results Display Area
Item Description Comments
Read/Write Designation
Area
Select Read or Write
in the Read/Write Designation Area.
OK/NG Display Area The Read/Write
command execution results will be displayed as OK
or NG in the OK/NG Display Area. If NG is displayed, information on
the error will be displayed.
Page Designation Area Select the check boxes to specify the pages to be read or written.
Write Data Designation
Area
When writing data, specify the data to write to the ID Tag as a hexa-
decimal string. Specify 16 characters for each page that you specify
in the
Page Designation Area.
Repeat Check this box if the program is to be run repeatedly.
Send Button Press the Send button to send the command.
When you press the Send button on the right side of the Command,
the content displayed in the Command is sent.
Command Commands actually sent to the amplifier unit are displayed.
Communications Results
Display Area
Transmitted and received data to the amplifier unit are displayed.
TX: The data transmitted toward the amplifier unit is displayed.
RX: The data received from the amplifier unit is displayed.
Execution example
Successful Communications
3 V640 Utility Tool Features
3-9
V640 SERIES CIDRW SYSTEM OPERATION MANUAL V640 Utility Tool (Z469-E1)
3-4 Command Window
3
3-4-2 V640 Command
To Next Page
Loading...
Need help?
General
