Omron ZFX-C Command Reference

About Communication Commands
28
ZFX-C Serial Communication Command Reference
Backing up Bank Data < BNKSAVE command >
Backing up bank data to an external device from the Controller
This command backs up the bank data from the Controller by XMODEM protocol.
< Command format >
< File transfer >
The bank data is transferred by XMODEM (-CRC or SUM) after READY is received. XMODEM (-1K) is not
supported.
< Response format >
< Explanation of parameters >
Backing up bank data to an SD card from the Controller
This command backs up bank data to an SD card from the Controller.
< Command format >
< Response format >
< Explanation of parameters >
Bank No. Specifies the bank No. to back up. (0 to 31)
Bank No. Specifies the bank No. to back up. (0 to 31)
File name The file can be given any name within eight alphanumeric characters. (An extension is not
required.)
BNKS
C
R
B S
C
R
AVE 0 0
Bank No.
(max. 2 digits)
or
Bank No.
(max. 2 digits)
OK
C
R
ER
C
R
R EAD
C
R
Y
When processing ends successfully
When processing fails
B NKS
C
R
B S
C
R
AVE11
or
File name File name
Bank No.
(max. 2 digits)
Bank No.
(max. 2 digits)
OK
C
R
ER
C
R
When processing ends successfully
When processing fails

Omron ZFX-C Specifications

General

Brand	Omron
Model	ZFX-C
Category	Accessories
Language	English