Omron ZFX-C

About Communication Commands
30
ZFX-C Serial Communication Command Reference
Uploading image data to the Controller from an SD card
This command uploads image data to the Controller from an SD card.
< Command format >
< Response format >
< Explanation of parameters >
Save memory No. Specifies the No. of the save memory for saving the image data to. (0 to 99)
File name Specifies the file name (within 8 characters, excluding the file extension). File extensions
".GRY" (image captured by a monochrome camera) or ".BYR" (image captured by a color
camera) are allowed.
IMGL
C
R
IL
C
R
O A D11
or
File name File name
Save
memory No.
(max. 2 digits)
Save
memory No.
(max. 2 digits)
OK
C
R
ER
C
R
When processing ends successfully
When processing fails